I was insanely sore still after the work on Sunday so took a muscle relaxer before PT which helped my damn body relax a bit better. I managed to make it through the exercises with some added effort needed.

I got home from PT and looked at my computer to see it had rebooted itself. It took forever to startup then and I found that my 3 USB a/3.0 ports on the side of my laptop are DEAD! I have tried numerous things so far to troubleshoot but nothing has worked so far. THANKFULLY I have a USB-C port on the back and my little hub works so I have a mouse again and can still use my system. I ordered a new mouse, the M550 which has bt and a dongle, since the bt works perfect still. None the less an odd ass morning and thing to have to troubleshoot. I have to try the hardware reset before I pop the bottom off to inspect the hub on the board.

PDC is ongoing so had that on for mid day. I headed over to the river to get in some fly throwing before noon.

I was fishing for nearly an hour downstream of the beached railroad tie and got not one nibble. Finally I stepped back upstream of it and cast at he faster water, letting my line out to float down stream. Finally I got some bites and then managed to land a single rainbow trout. It was only about 7 inches and went back in the water.

The rain moved in so I packed up and rode the bike back to the house before the heaviest rains hit.

The rain was a band that moved across the region and was past after a couple hours.

My new cardputer arrived from China so I got a case printed out for it quickly.

J's amp arrived and it is pretty slick. Super slim and light weight it should be more than enough for J and his Bass that will be here Thursday.

My carport was to deliver and I needed to clear the space where it will be getting setup. I raked it all out good and moved a bunch of stuff around.

4:30 UPS delivered 2 big ass boxes and I had the gate open so he could back right up by the house.

I drug the boxes inside the fence and popped them open to find that I was missing most all the pipes!!!! I was not happy and immediately went to Amazon to then find out there is a 3RD BOX still!!! Apparently the 3rd box is in transit and will be here Thursday. My blood pressure quickly leveled off once I found that out.

Nifty rugged box for the cardputer but I instead made it my new fly box.

The one I had printed before has no latchability now but this box is burly. It has 2 latch spots but I only need the one. I went together with m3 screws.

I then realized that magnets on the back make the flies stay perfectly in place and doesn't allow them to shake around inside, thus keeping them safer and less noise/rattle sound. I epoxied the magnets in place and let it cure over night. This morning it is dry and I have a lanyard clipped to the unused latch hole. Pretty slick and super safe for my flies.

Boys are off school today, I have my chiro mid morning, new mouse arrives, likely go fish a bit, PDC continues, the printer will be going much of the day again, I'll be getting my fly tying station setup, work on the USB ports, and then come up with something for dinner this evening.

^Affiliate/Referral Link^

FLEMING FAMILY FARM, LLC
Sustainable & Organic Methods | Heirloom Produce**

All images are original works of Fleming Family Farm unless otherwise notated and credited.

If you find this post useful or entertaining, your support is greatly appreciated by upvoting, following, and sharing!

You can Also Find Me On:

Donations or Tips

Zap Me ⚡️ ᛒᛏᚲ
[email protected]
[email protected]