The snow was moderately wet and I had to get out to clean off the cars, deck, and bring down the snow shovels.

Little bit of winter. Rain is in the forecast the rest of the week.

I had my first individual session and am Quite happy with Anna already. Something I have needed for much of my life and I have an incredible amount of work to do to try and deal with and reduce the impact my life has on my life.

Right after was my chiro appointment which was good and now that my back muscles aren't locked up solid the joints adjust a ton better.

I stopped at North 40 on the way home. The sale ad came out and it had a Ruger bb/pellet rifle for half off! $40 each so I used a $100 I had to pick up a pair for the boys for Christmas presents. I also stopped in Mecca, The Fly Shop, and met the "new" employee who transferred over from the Airway store. Picked up some beads and lead free wire for tying flies.

The road was perfect by the time I was headed for home.

These will make the boys quite happy since the old pellet rifle I have floating is pretty shitty. These will get taken much better care of as I will ensure that.

The mid part of the day was taken up by the coop door opener. I managed to get it all coupled together and the program coded. I will be wiring it in just before 8am to see if it will work or not. I may have to dink with it if it doesn't engage the motor. I'll know in under 2 hours.

I got to work on the truck mid afternoon and used the air ratchet to get the more stubborn bolts and nuts removed, like the a/c pump and exhaust bolts.

Then I ran into a problem. I was loosening all the valve cover bolts when I ended up with a stuck nut on the back of the passenger side cover. I am going to have to work at getting it off first thing today.

Next steps is to remove the driver side exhaust to make room to get the starter off then the bell housing bolts and the transfer plate bolts off. I would love to have the engine out today but may not manage it until tomorrow.

Got the frame printed for the bobbin holder for my tying threads. The cross arms printed over night but I borked a few by not noticing they were not flat on the plate but hovering a hair. I have the 1 needed replacement printing right now.

No weather today and it will be a bit warmer. Boys to school in a bit, coop door controller testing just after, printer is going already and I have more stuff to keep it going all day, then work on the truck, work on mesh, then we have our session this evening.

^Affiliate/Referral Link^

FLEMING FAMILY FARM, LLC
Sustainable & Organic Methods | Heirloom Produce**

All images are original works of Fleming Family Farm unless otherwise notated and credited.

If you find this post useful or entertaining, your support is greatly appreciated by upvoting, following, and sharing!

You can Also Find Me On:

Donations or Tips

Zap Me ⚡️ ᛒᛏᚲ
[email protected]