Snow-ish, 3d Printing, FunGuy, Utd, Hay Bale Roll, Mud Bridge, Engine, Krash-n-Burn - Thursday

Woke to the snow trying to fall yesterday morning. It was not a lot and the whole day was a mix of snow and slush.

Screenshot_20251204-050053.png

The set of thread holders got done and they came out rather nice. I need to fine finish them to smooth out the rough spots.

IMG_20251204_060243.jpg

Just a smattering of snow as it warmed in the morning.

IMG_20251204_070050.jpg
IMG_20251204_075653.jpg

Despite the freezing temps there is still fungus popp3d up around the farm. These are right by the house so may get a bit of warmth from the mass.

IMG_20251204_101905.jpg

Man Utd really are awful. Amorin's hardon for Bruno is tanking the team even worse than normal.

IMG_20251204_131658.jpg

Of course they tied, though they really should have lost.

IMG_20251204_134145.jpg

The sheep had mawed through their bale so it was time to roll another one in. Nicely the pallets pull apart easy enough so I just spun the bale and rolled it into the pen.

IMG_20251204_140347.jpg

I tossed the rain covers over the top then noticed the mud wallow in the gate area.

IMG_20251204_140828.jpg

I went to grab a pallet to use and found a likely rabbit hole that I need to go back and set the traps on.

IMG_20251204_141054.jpg

I was proud of the alpaca and sheep for walking right across the bridge I made for them.

IMG_20251204_141704.jpg

I used a part of a tree with branches as the base layer to cover the mud then dropped the pallet on the top. It makes a nice bridge over the deep mud below and they all had no problem with the pallet and they will be MUCH happier not having to tromp through the deep mud.

IMG_20251204_141710.jpg

I had little ambition all day long and finally got out to the truck where I got the bolts loose on the exhaust flange but then couldn't get the damn piece pulled out. I gave up for the day and will work on it today.

IMG_20251204_151010.jpg

It was an 8 hour print for the next set of thread holders. They are nice and smooth like the others and just need a little finishing to smooth them out. These are nice and small and compact but are nice and strong for holding the bobbin.

IMG_20251204_153822.jpg

4pm we got some solid big flakes falling for a bit that soon flaked off.

IMG_20251204_160609.jpg

It was obvious from the start that it was going to be a shit show and it totally ended up as such.

IMG_20251204_181740.jpg
IMG_20251204_184442.jpg

Gave up on the game as the blowout continued.

IMG_20251204_185004.jpg

Again some more flakes as we were going to bed but it didn't amount to much of anything.

Screenshot_20251204-204254.png

Rain likely today, will get boys to school soon, hit the Fly Shop for the new PNW Flies book I saw, order my new computer desk, set the trap for the likely rabbit, then I HAVE to work on the truck more as well as continue cleaning and organizing in the house. Our friend is coming over this evening so will try to figure out what we are doing for dinner later.


ᛏᛋᛇᛉᚱᛚ

2025 Y/E Hive GoalsYr StartGoalCurrent+/- Goal+/Week
Hive Posting Streak Days (since 5/25/20)16812,0472,020/6



^Affiliate/Referral Link^




FLEMING FAMILY FARM, LLC
Sustainable & Organic Methods | Heirloom Produce**
All images are original works of Fleming Family Farm unless otherwise notated and credited.

If you find this post useful or entertaining, your support is greatly appreciated by upvoting, following, and sharing!

You can Also Find Me On:

nostr icon.jpg

Donations or Tips


Zap Me ⚡️ ᛒᛏᚲ
[email protected]


Veteran.jpg



0
0
0.000
4 comments
avatar

If this keeps up looks like you'll have a white Christmas my friend!😀
Over here........ Rain!🙄

0
0
0.000
avatar

The rest of the week is rain... If it cools off we could have snow for Christmas.

0
0
0.000
avatar

Nonstop rain over here, my friend….🙄
I’m already so tired of this!

0
0
0.000