3DP, Stagnation, PDC, Run, Watercolor, Darts, Engine Troubleshooting, Fire, Grilling - Friday

Another sheet of fabric was waiting on the printer yesterday morning. I had enough filament to get it done overnight, but then the next spool went on and I set the printer to go only to find it borked, and not when it happened but about 2 hours later as it was still thinking it was printing.... Garbage old filament.

IMG_20260116_053200.jpg

This is NOT winter. This is some sick joke being perpetrated by nature. We are in an air stagnation warning thanks to this garbage weather pattern.

Screenshot_20260116-053412.png

Got the boys to school and the fog had largely lifted overnight.

IMG_20260116_074354.jpg

PDC Bahrain finals day and Littler got demolished by Price. Lurch, I mean MVG won the tournament.

IMG_20260116_083244.jpg

I had done my mile right after dropping the boys off. I got a minute faster this time but it still felt like a death march.

Screenshot_20260116-092235.png

Mid match the lights in the arena went out. The crowd started using their phones to light then the broadcast cut until it was fixed.

IMG_20260116_094617.jpg

While the finals were on I got my watercolors done for the day.

IMG_20260116_104437.jpg

IMG_20260116_115449.jpg

My aim at the board is getting SOOOO much better now.I was SO close with this one as the 3rd dart bent the wire outside the triple bed.

IMG_20260116_123213.jpg

On the truck I was poking all around the engine and decided to pop off the intake. There was a step in the guide to clean the throttle... No clue if it is the problem but popped it off to find it did need cleaning.

IMG_20260116_135216.jpg

THIS was inside the intake housing.... THICK layer of shit coating the inside... This is past the filter.... I need to get a new filter to put in. I used carb and choke cleaner on the throttle and managed to nearly freeze my fingers tips.

IMG_20260116_140235.jpg

I was walking past the printer and saw the borked print. Meant I had to pull the extruder apart thanks to the shitty old filament. I had it in the dryer but it didn't seem to matter. I eventually yanked the roll out and ordered more good PLA that will be here to day and I will keep going on the fabric sheets.

IMG_20260116_141528.jpg

OMFG!!! The first dart slammed into the triple then the next two clipped the wire just high. It's wild seeing the wire flex from the darts they are so close.... yet so far away.

IMG_20260116_143401.jpg

At 3pm the boys got off the bus and I met them out there in the sled, then headed to the co-op pickup. We were back by 3:45 and then I headed out to work on the truck some more. I have to try and clean the inside of the intake the best I can today.

IMG_20260116_164613.jpg

I got the fire going and made sure to keep it going through the evening.

IMG_20260116_172208.jpg

Grilled our burgers for dinner while we had music videos on the tv for the evening.

IMG_20260116_182230.jpg

My groupings are getting much tighter if anything. It was late when we finally went to bed.

IMG_20260116_191216.jpg

Up early to see the Man Derby right now as they managed a goal, will do a mile run when it is light, work on the truck more, maybe hit North 40 for dog toys, then the Seahawks play this evening, and I will have the printer going as soon as the filament arrives.


ᛏᛋᛇᛉᚱᛚ

2026 Y/E Hive GoalsYr StartGoalCurrent+/Week
Hive Posting Streak Days (since 5/25/20)20472,4122,0647



^Affiliate/Referral Link^




FLEMING FAMILY FARM, LLC
Sustainable & Organic Methods | Heirloom Produce**
All images are original works of Fleming Family Farm unless otherwise notated and credited.

If you find this post useful or entertaining, your support is greatly appreciated by upvoting, following, and sharing!

You can Also Find Me On:

nostr icon.jpg

Donations or Tips


Zap Me ⚡️ ᛒᛏᚲ
[email protected]


Veteran.jpg



0
0
0.000
1 comments
avatar

The burgers look so delicious my friend enjoy!!!👍😀
Maybe the intake has got something to do with the issues on the truck it definitely is dirty......

0
0
0.000